The new Sub 600 brings true Dynaudio sound quality and real deep bass to any Home Cinema or Music system.
A high performance subwoofer is an absolute must for any advanced loudspeaker system to allow one to hear as well as
feel the deepest bass notes and natural sound effects. The Dynaudio Sub 600 brings true Dynaudio sound quality to any
Home Cinema or Music system and is available in 7 different finishes to complement the various Dynaudio speaker ranges.
The Dynaudio Sub 600 is the most advanced Dynaudio subwoofer available. With its high-performance 300 Watt amplifier
and large 30 cm / 12" woofer, the Sub 600 provides serious weight, authority and power for ambitious home theaters, yet
remains precise, fast and musical to fully meet the demands of any audiophile hi-fi system.
The sealed enclosure cabinet
design and forward firing woofer offer remarkable bass precision while making the Sub 600 relatively easy to position in
any room. Read more...
The Sub 600 is available in a choice of real-wood veneer finishes: Maple, Walnut, Cherry, Rosewood and Black Ash.
The Sub 600 is also available in Piano White Lacquer and Piano Black Lacquer. Due to resolution limitations the pictures do not do justice to the fine veneers’ true colors and textures.
Sub 600
Proprietary Dynaudio technology
As a true Dynaudio product it incorporates exclusive Dynaudio driver technology: A light yet rigid Magnesium Silicate
Polymer diaphragm, an extra large and extremely powerful double magnet assembly and an ultra-rigid die-cast aluminum
driver basket ensure a precise and detailed reproduction of both music and sound effects, while the large, extra-long voice
coil and long-throw driver design result in a powerful and deep low frequency performance extending down to 18 Hz.
Critical to the success of any subwoofer-enhanced system is its ability to precisely integrate with the main speakers.
The utilization of the distinctive Dynaudio driver technology in the Sub 600 makes system integration with Dynaudio
floorstanding and compact loudspeakers especially easy, as each features the same MSP diaphragms - thus sharing the
authentic, natural sound reproduction which guarantees a seamless sound integration in the upper bass.
Advanced amplifier electronics
The latest Dynaudio amplifier technology is mated to the exceptionally large woofer of the Sub 600. Delivering 300 Watt
output power, the amplifier circuit features select components and was developed in collaboration with the Dynaudio
Professional team, itself responsible for some of the finest active monitor speakers available in the studio market. In
addition to the high quality and performance, the amplifier circuit incorporates a selectable Auto on-off function, variable
gain setting, a variable Low-Pass Filter (50 Hz to 150 Hz), and a selectable phase switch (0º or 180º). The signal can be
fed from an AV Receiver's subwoofer or LFE output into the Sub 600's LFE input (1 x RCA), or from a Stereo Amplifier's
Pre-Out into the Sub 600's Sat/Sub stereo input (2 x RCA).
A selectable High-pass Filter (Flat, 60 Hz, or 80 Hz) enables the Sat/Sub input to facilitate a seamless crossover
integration between the main speakers and the Sub 600. Incorporating a subwoofer to augment the low frequency
performance of any stereo or multi-channel loudspeaker system offers an additional benefit: by reducing the strain on the
speakers in terms of reproducing extreme bass information, the overall quality of lower midrange frequencies and the
overall soundstage reproduction can be greatly improved.
The Sub 600 is also eco-friendly when not in use, as its standby power consumption is less than 0.5 Watt, while a hard
on/off power switch is featured on the back panel.
Multiple Subwoofers for advanced setups
The included Slave function allows one or more additional Sub 600s to be connected to the first, or “Master” Sub 600 for
advanced Dual-Sub or Multi-Sub systems. Incorporating dual or multiple subwoofers in a system makes it possible to
balance out the unavoidable bass nodes one would typically experience through utilizing a single subwoofer in any given
room. Bass notes become less directional, and dynamic headroom is increased, even at extremely high sound pressure
levels.
Excellent cabinet construction and a remarkable wide choice of finishes
The nearly cubic shape and the highly rigid cabinet construction serve to reduce resonance to an absolute minimum.
With a choice of Maple, Cherry, Walnut, Rosewood, or Black Ash real wood veneer, as well as Gloss White or Black Piano
Lacquer finishes, the Dynaudio Sub 600 will match any Dynaudio loudspeaker and easily integrate into any room or décor.
The Dynaudio Sub 600 – a perfect match to any Dynaudio speaker system, providing a truly emotional experience and
authentic Dynaudio sound quality with a deep bass you can not only hear but also feel throughout your body.
Highlights
•
Sub 600 brings Dynaudio sound quality to Home Cinema and Music
•
High-performance 300 Watt amplifier and 30 cm / 12" woofer
•
Auto on-off function, LFE or Sub/Sat mode, 0.5 watts standby consumption
•
Available in 7 finishes to complement the Dynaudio speaker ranges
