Your order

Close

Subtotals

Hub User manual

Front plate

Operational state

= an audio signal is played back

= connection but no audio signal

= no connection to a Hub/Connect or Extender,

= standby mode

Rear plate

Coax Out

Output for electrical digital cable

Connect devices here that have an electrical digital input (coax).

Optical Out

Output for optical digital cable

Connect devices here that have an optical digital input (Toslink).

Line out

Output for cable with RCA plug

Connect devices here that have an input for the RCA plug.

Zone

Audio zones

Select the desired audio zone here.

Power

Connection for power supply unit

Connect the delivered Xeo power supply unit here.

Do not use a different power supply unit!

Connection

  1. Connect the Power socket to the voltage supply via the Xeo power supply unit.
    Do not use a different power supply unit!
  2. Select an audio zone: Red, Green, or Blue.
    Use one of the outputs to connect Xeo Link with one of the active components, e.g. the active subwoofer Dynaudio Sub 3.
  3. Select the desired signal source with the remote control and control the volume.

Division into audio zones

Xeo Link (as well as the Xeo speakers) can be assigned to audio zones using the Zone selector switch. All components assigned to the same zone can be operated together via the remote control.

The picture shows a possible zone configuration.