High-quality mid/bass drivers
Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer.
It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.
The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.
Top-end performance
Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family.
It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.
Danish cabinet design
Emit 25C is available in three custom laminate finishes: Black, White and Walnut.
They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself.
Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.
Emit
Features
Designed and engineered in Denmark
The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned.
Cerotar tweeter
Emit uses the highly regarded Cerotar tweeter from our Evoke series. It's a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome.
Clean and simple
Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you're listening in stereo or have a full multi-channel system.
- Status Current
- Segment Home
- Series Emit
- Type Center
- Sensitivity (dB @ 2.83V/1m) 87
- IEC Power Handling (W) 180
- Rated Impedance (Ohm) 4
- Lower Cutoff (Hz @ +/- 3 dB) 53
- Upper Cutoff (kHz @ +/- 3 dB) 25
- Lower Cutoff (Hz @ -6 dB) 46
- Upper Cutoff (kHz @ -6 dB) 35
- Box Principle Bass reflex rear double flared port
Stephen Entwistle, Senior Acoustics Engineer, Product Manager
Find a dealer
Find your nearest Dynaudio dealer and pay them a visit today, or sign up for a listening session.
{name}
- {productImages}
Products
Emit series
- Status:
- Segment:
- Series:
- Type:
- Sensitivity (dB @ 2.83V/1m):
- IEC Power Handling (W):
- Rated Impedance (Ohm):
- Lower Cutoff (Hz @ +/- 3 dB):
- Upper Cutoff (kHz @ +/- 3 dB):
- Lower Cutoff (Hz @ -6 dB):
- Upper Cutoff (kHz @ -6 dB):
- Box Principle:
Emit 10
- Current
- Home
- Emit
- Bookshelf
- 86
- 150
- 6
- 64
- 25
- 52
- 35
- Bass reflex rear double flared port
Emit 20
- Current
- Home
- Emit
- Bookshelf
- 86
- 160
- 6
- 53
- 25
- 42
- 35
- Bass reflex rear double flared port
Emit 25C
- Current
- Home
- Emit
- Center
- 87
- 180
- 4
- 53
- 25
- 46
- 35
- Bass reflex rear double flared port
Emit 30
- Current
- Home
- Emit
- Floorstand
- 88
- 180
- 4
- 55
- 25
- 39
- 35
- Bass reflex rear double flared port
Emit 50
- Current
- Home
- Emit
- Floorstand
- 86
- 240
- 4
- 33
- 25
- 28
- 35
- Bass reflex rear double flared port
Dynaudio Magazine
Dynaudio Magazine is our universe of sound and music-related articles, videos, and podcasts, covering everything from loudspeakers and technology to extraordinary people, and our very best tips and tricks.
What kind of subwoofer should I choose? Sealed or ported?
On this episode Ask The Expert, we're discussing subwoofer design, and the pros and cons of sealed-box versus ported designs in the world of low end d...
Where should I place the centre speaker?
On this episode of Ask The Expert, we're going to talk about speaker placement in surround setups, specifically when used with a television.
Designing Confidence 20
On this episode of Ask The Expert, we'll be answering some questions about the design of Confidence 20, including its rather unique bass port design, ...
