for at least 2 seconds. To undo fixing, press one of the two volume buttons.Standby
To switch speakers to sleep mode:
- Point the remote control at a speaker and press
or press 
on top of one of the speakers. - The speakers will enter sleep mode.
- The speakers also enter sleep mode if there is no audio signal for 20 minutes.
- In this mode, the wireless network is active and all connected units remain synchronized.
- Sleep mode power consumption is <2 W.
To switch speakers to low-power standby mode:
- Press and hold on the remote control for at least 5 seconds.
- The speakers go to low-power standby mode.
- In this mode, the wireless network is disabled and the speakers are not connected to each other.
- Low-power standby mode power consumption is <0.5 W.
To turn off auto standby:
- Press and hold
on the remote control for at least 5 seconds.