Your order

Close

Subtotals

Xeo 20 User manual

Connections and Control Elements

Elements on the Rear Panel

Click or tap on a letter (for example A) to jump to the description of this element.

The Xeo 10/20/30 set consists of a master and a slave unit. The master unit carries the audio input interfaces.

A: Speaker position

Sound adjustment (depending on the position of the speakers)

  • Neutral = with free-standing placement
  • Wall = if placed near a wall
  • Corner = if placed in a corner

Speaker placement

  • Left = left speaker for stereo mode
  • Right = right speaker for stereo mode

B: Speaker ID/Zone

Selection of audio zones: Speakers assigned to different zones can be controlled separately via the remote control. The zones are identified as Red, Green, and Blue.

C

Aux In: To connect an analog audio source to the speaker via mini jack.

Line In: To connect an analog audio source to the speaker via RCA.

D

Optical In (Toslink):

To connect a digital audio source to the speaker.

E

USB In

For firmware update only.

F

Mains socket

To connect the speaker to the mains voltage.

Buttons on Top of the Cabinet (Xeo 10)

Speaker On / Off

  • Press to switch on the speakers. The Xeo 10 will scan the inputs for a signal.
  • Press and hold to switch off the speakers.

Input selection

  • When switched on, press to jump to another input.

Volume control

  • Press or to raise or lower the volume level. Press and hold for faster adjustment.

Bluetooth Pairing

  • Press and hold both and to start pairing.

Remote Control

Commands will always apply to both of the speakers.

MUTE

Muting the speakers

  • Press to mute or unmute the speakers.

Fixing the volume

ON/OFF

Speaker On/Off

  • Press to switch on the speakers.
  • Press for standby mode.
  • Press and hold until LED turns red to put speaker in sleep mode.
  • Press and hold for 5-9 seconds to enter night mode (Turns the LEDs off).

Reset

  • Press for at least 5 seconds to reset the speakers to the factory settings.

VOLUME

Volume Control

  • Press or to raise or lower the volume level.

INPUT

Signal Source

  • Press a button to select the respective signal source.
  • selects a Bluetooth device or Hub/Connect.

Bluetooth Pairing

  • Press for at least 5 seconds to enter pairing mode.