BM14S II

Introduction

The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors.

The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors, adding extended bass in mid-sized mixing and recording environments.

12" Subwoofer
Handcrafted driver
Selectable LFE or slave mode
Made in Denmark

We believe monitors should sound great at all volume levels - low and high

Sebastian Rodens, Product Manager

Say hello to our newest Personal Reference Monitor – LYD.

Specification sheet for BM Series part 2
System:	Precision Subwoofer
Frequency Response (±3dB):	18Hz - 250Hz
Inputs:	LFE/Slave, SAT/SUB, XLR right/left full bandwidth
XLR Input impedance:	+ branch 20 kOhm, – branch 10 kOhm
Sensitivity:	75 mVRMS to 5 VRMS, adjustable
Max. Input voltage:	10 VRMS
Outputs:	Slave, SAT/SUB, XLR right/left, High-pass filtered
XLR Output impedance:	100 Ohm (each branch)
XLR Pin-out:	1: 0 / 2: + / 3: –
Mode selector:	LFE, Slave (Phase and volume controls are bypassed in slave mode

Specification sheet for BM Series part 1
Phase adjustment:	0° - 180°
SAT High-pass:	Flat, 60Hz, 80Hz
SUB Low-pass:	50Hz - 150Hz
Auto ON/OFF:	Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
Amplifier power:	300W, 4 Ohm
Power consumption:	<16W Standby, 325W Max.
Woofer:	300 mm/12”, One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
Weight:	21kg. / 46.3lbs
Dimensions (W x H x L):	350 x 350 x 369.5 / 13.8” x 13.8” x 14.5”