Technical specifications
| Input level for 85 dB SPL @ 1 m, @ 0 dB setting, unbalanced | 80 mVrms |
| Max input level (@setting) | 4,8 Vrms (-10 dB) 1,5 Vrms (0 dB) 1 Vrms (+4 dB) |
| Power consumption | Standby: 0.3 W Idle: 5.8 W Max: 94 W |
| Amplifier power | Tweeter: 50 W Woofer: 50 W |
| Max SPL 1 m, normal room, short term IEC signal | 118 dB peak |
| Frequency Response (+/- 3 dB) | 42 Hz to 24 kHz |
| Resonance Frequency | 45 Hz |
| Internal Cabinet Volume | 9.5 liters |
| Bass Principle | Bass reflex |
| Weight | 7.7 kg |
| Dimensions (Depth x Width x Height) | 296 x 186 x 320 mm |
| Crossover | 2 way |
| Crossover Frequency | 1900 Hz |
| Crossover Slope | 12 dB/oct |
| Connection | XLR balanced and RCA unbalanced |
| Recommended Placing | Desktop |
| Tweeter | D-281 – 28 mm soft dome, rear chamber, magnetic fluid 4 mm aluminum front Pure aluminum wire voice coil |
| Woofer | 180 mm molded aluminum frame One piece thermo formed MSP cone 75 mm voice coil with pure aluminum wire on aluminum former. |
| Cabinet | Designed to be placed on a desk. 18 mm MDF |
| Crossover | Active, DSP based |
| Amplifier | Input sensitivity selector HF, MF and LF trim selector High pass frequency selector Auto standby/On selector Optional remote volume control (cabled) High efficiency digital power amplifiers. Switch mode power supply with wide range input |
Due to continuous development, these specifications are subject to change without notice.