Your order

Close

Subtotals

Core 7 User manual

Core 7, 47, 59 monitors and Core Sub

The transducers of your Dynaudio Core monitor will achieve a better sound quality after a break-in period. Especially after the first hours of use, you may notice a significant increase in sound quality, and further subtle improvements in subsequent hours of use.

Amplifier

The Core monitor range features integrated Class-D amplifiers with analogue and digital inputs. All connections and settings are available on the back plate of the amplifier. Please do not remove the amplifier yourself. In case of service, contact your Dynaudio reseller.

Figure 1: Core controls
  1. Power mode: Power-saving auto-standby switch
  2. Bass extension: sets a Linkwitz-Riley HPF at 80 Hz
  3. Digital channel: selects the left or right channel of the AES digital input signal
  4. Sound balance: switches between three tilt filter settings
  5. Position switch 1: position filters
  6. Position switch 2: boundary filters
  7. Analogue input sensitivity: sets the maximum input voltage
  8. SPL level: sets the SPL for -6 dBFS (-6 dB from selected maximum input voltage)
  9. AC power Input (100-240 V)
  10. Analogue in: Balanced analogue input (XLR)
  11. Digital In: AES digital input (XLR)
  12. Digital Out: AES digital output – pass through for second monitor (XLR)
  13. Word Clock: Word Clock input (75 Ω BNC)
  14. Service: USB Type B for firmware update or service
Figure 2: Core Sub Controls
  1. Power mode: Power-saving auto-standby switch
  2. Bandwidth: sets a Linkwitz-Riley LPF at 80 Hz
  3. Position switch 1: position filters
  4. Position switch 2: boundary filters
  5. Attenuation: for use with two or four subwoofers
  6. Digital channel: selects the left, right, or left + right channels of the AES digital input signal
  7. Analogue input sensitivity: sets the maximum input voltage
  8. SPL level: sets the SPL for -6 dBFS (-6 dB from selected maximum input voltage)
  9. AC power Input (100-240 V)
  10. Analogue in: Balanced analogue input (XLR)
  11. Digital In: AES digital input (XLR)
  12. Digital Out: AES digital output – pass through for second monitor (XLR)
  13. Word Clock: Word Clock input (75 Ω BNC)
  14. Service: USB Type B for firmware update or service