Your order

Close

Subtotals

BM14S II

BM14S II

The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors.

BM14S-mkII-front.jpg

Choose finish

Introduction

BM14S II

The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors.

The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors, adding extended bass in mid-sized mixing and recording environments.

Features

Don't just take our word for it

  • 12" Subwoofer

  • Handcrafted driver

  • Selectable LFE or slave mode

  • Made in Denmark

We believe monitors should sound great at all volume levels - low and high

Technical specifications

Don't just take our word for it

Specification sheet for LYD part 2
System: Precision Subwoofer
Frequency Response: 18 Hz to 250 Hz (+/-3 dB)
Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
XLR Input impedance: + branch 20 kOhm, – branch 10 kOhm
Sensitivity: 75 mVRMS to 5 VRMS, adjustable
Max. Input voltage: 10 VRMS
Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
XLR Output impedance: 100 Ohm (each branch)
XLR Pin-out: 1: 0 / 2: + / 3: –
Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
Specification sheet for LYD part 1
Phase adjustment: 0° - 180°
SAT High-pass: Flat, 60 Hz, 80 Hz
SUB Low-pass: 50 Hz to 150 Hz
Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
Amplifier power: 300 W, 4 Ohm
Power consumption: <16 W Standby, 325 W Max.
Woofer: 300 mm/12”, One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
Weight: 21 kg. / 46.3 lbs
Dimensions (WxHxL): 350 x 350 x 369.5 / 13.8” x 13.8” x 14.5”

Downloads & links

Want to know more?

Hide map

Find a dealer

View on Google maps Close directions